Synthesis and characterization of porous platelet-shaped α-Bi<Subscript>2</Subscript>O<Subscript>3</Subscript> with enhanced photocatalytic activity for 17α-ethynylestradiol

The porous platelet-shaped α-Bi₂O₃ photocatalyst was successfully synthesized by a novel hydrothermal–calcination method assisted with ethylenediamine and polyvinylpyrrolidone. The physical and chemical properties of α-Bi₂O₃ photocatalyst were characterized based on XRD, XPS, SEM, TEM, EDS, UV–Vis DRS, and PL techniques. The influence of preparation conditions on the formation of α-Bi₂O₃ photocatalyst was investigated, and the effect of catalyst dosage and pH value on the EE2 removal rate was also investigated. The synthesized porous platelet-shaped α-Bi₂O₃ photocatalyst exhibited excellent photocatalytic activity for 17α-ethynylestradiol (EE2), and 97.8% of EE2 was removed after 75 min of visible light irradiation using α-Bi₂O₃ as photocatalyst. The reaction rate constant over the porous platelet-shaped α-Bi₂O₃ photocatalyst was 11.6 and 11.4 times of that of traditional α-Bi₂O₃ and N-TiO₂, respectively. The possible photocatalytic mechanism has been discussed on the basis of the theoretical calculation and the experimental results. The porous platelet-shaped α-Bi₂O₃ was a stable and efficient photocatalyst, proving that it is a promising photocatalyst.     

Amino-functionalized magnetic bacterial cellulose/activated carbon composite for Pb2+ and methyl orange sorption from aqueous solution

A new nanostructured amino-functionalized magnetic bacterial cellulose/activated carbon(BC/AC)composite bioadsorbent(AMBCAC)was prepared for removal of Pb~(2+)and methyl orange(MO)from aqueous solution.The results demonstrated that the equilibrium adsorption capacity(q_e)for Pb~(2+)obviously increases by 2.14 times after introduction of amino groups,the optimum p H for Pb~(2+)and MO adsorption was 5.0 and 3.0,respectively,and the q_eof AMBCAC was 161.78 mg g~(-1)for Pb~(2+)and 83.26 mg g~(-1)for MO under the optimal conditions in this investigation.The kinetics and adsorption isotherm data of the sorption process were well fitted by pseudo-second-order kinetic model and Langmuir isotherm respectively.The thermodynamic results(the Gibbs free energy change G0,the enthalpy change H0,the entropy change S0)implied that the adsorption process of Pb~(2+)and MO was feasible,endothermic and spontaneous in nature.These results support that the AMBCAC composite developed in this work can provide a cheap and efficient way for easy removal of both Pb~(2+)and MO as a promising adsorbent candidate for wastewater treatment.     

Comparison of microwave and high-pressure processing on bound phenolic composition and antioxidant activities of sorghum hull

The influence of microwave boiling (MB treated 5, 10 and 15 s was abbreviated as MB5, MB10 and MB15, respectively) and high-pressure boiling (HB processed 10, 20 and 30 min was denoted as HB10, HB20 and HB30, respectively) processing on the composition and content of bound phenolic substances of sorghum hull and their antioxidant capacity were evaluated. Nine bound phenolic profiles were identified by HPLC-ESI-MS/MS, including syringic acid, veratric acid, p-hydroxybenzonic acid, caffeic acid, sinapic alcohol, ascorbic acid, prenylnaringenin and luteolin. Compared with traditional hot water processing (HP treated 10, 30 and 50 min was abbreviated as HP10, HP30 and HP50, respectively), the content of free procyanidins and total phenolics of sorghum hull treated with HB increased by 35.92–58.87% and 6.20–18.70%, respectively. Sorghum hull treated with HB20 possessed the highest ABTS (ABTS radical scavenging capacity) and FRAP (ferric ion reducing antioxidant power) among all treatment groups.     

A Distributed Management Method Based on the Artificial Fish-Swarm Model in Cloud Computing Environment

Recently, there are some problems in the centralized management, such as centralized management, heavy burden, excessive number of virtual machine migration, lack of mutual cooperation mechanism between nodes, can’t adapt to the cluster of change. The existing distributed management methods exist between the nodes have less cooperation mechanism and only simple communication, quality of service is no obvious improvement, system can save energy consumption is not obvious. According to the behavior characteristics of the fish, this paper presents an artificial fish to achieve mutual cooperation of nodes in the distributed management method.     

Epidemic contact tracing with smartphone sensors

ABSTRACT

Contact tracing is widely considered as an effective procedure in the fight against epidemic diseases. However, one of the challenges for technology based contact tracing is the high number of false positives, questioning its trust-worthiness and efficiency amongst the wider population for mass adoption. To this end, this paper proposes a novel, yet practical smartphone-based contact tracing approach, employing WiFi and acoustic sound for relative distance estimate, in addition to the air pressure and the magnetic field for ambient environment matching. We present a model combining six smartphone sensors, prioritising some of them when certain conditions are met. We empirically verified our approach in various realistic environments to demonstrate an achievement of up to 95% fewer false positives, and 62% more accurate than Bluetooth-only system. To the best of our knowledge, this paper was one of the first work to propose a combination of smartphone sensors for contact tracing.     

High‐performance printable paper‐like composites derived from plastic flexible film wastes

Owing to lack of proper recycling methods, plastic flexible film wastes are usually directly discarded or incinerated, which brings about severe environmental pollution. Therefore, converting plastic wastes into value‐added products has received more and more attention in recent years. In this work, paper‐like composites derived from plastic flexible film wastes were prepared via the thermally induced phase separation method by adding polyethylene‐graft‐maleic anhydride (PE‐g‐MAH) as a compatibilizer and fumed silica as an additive. The resulting paper‐like composites were characterized by SEM and infrared spectroscopy. Other properties such as mechanical properties, thermal properties, whiteness, printability and adsorption performance were also tested in detail. It was found that remarkable enhancements in mechanical, thermal and printable properties of the paper‐like composites were obtained when nano‐SiO₂ loading was 2.5–3 wt%. Uniformly distributed holes that can endow good printability by providing space for ink or other functional molecules were observed by using SEM. Furthermore, the CIE whiteness value of the resulting composites can reach 91.6%–96.7% on adding nano‐SiO₂. Additionally, the paper‐like composites integrating nano‐SiO₂ and PE‐g‐MAH exhibited good solid ink affinity and high water or oil adsorption capacity. Thus, according to this research, high‐performance printable paper‐like composites used as major components of multifunctional papers can be prepared based on plastic flexible film wastes. © 2019 Society of Chemical Industry     

综放面端头及顺槽超前区顶板支护技术与实践

针对虎峰煤业2115工作面开采区煤层上部存在采空区和空巷的情况,结合工作面顺槽架棚支护的现状,通过采用“π”型梁支护管理工作面两侧端头和顺槽超前区顶板。现场实践表明,工作面回采过程中,工作面端头和超前区顶板管理较好,没有出现大面积网兜、落煤和落矸现象,顺槽金属棚能够及时回收,取得了较好的技术经济效益。     

核电厂中间量程保护定值标定方法改进

基于目前中国改进型三环路压水堆（CPR1000）部分机组存在因中间量程电流饱和导致无法在48%额定功率（Pn）完成定值标定及核电厂大修经济性考虑，采用MCNP程序及核设计软件包SCIENCE，研究分析中间量程保护定值标定的新方法。分析结果表明，中间量程保护定值标定调整至30%Pn功率平台实施，采用改进方法标定的保护定值更接近于设计值。